UPVC Replacement Door Handles
Over time, the handles on your doors will wear down and require replacement. It is important to keep the same dimensions as the old handles when replacing them.
The top screw's location, the lever and the keyhole size are the three measurements that you need to verify. Check the size guide for assistance in this.
Inline Lever/Lever
A lever/lever handle is a contemporary door handle that is designed to fit new or replacement doors. This type door handle is available in a wide range of styles and finishes. This handle is offered by several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The uPVC/Composite door handles are made of robust materials and are perfect for doors with multi-point locks that require a heavy duty design. The handles are inline, and they use the same spindle and screws to secure them. They are easily fitted on any uPVC/Composite doors.
The handle can be placed and angled to accommodate the needs of all users. The handle has been tested for endurance up to 200 000 cycles. This helps ensure that the quality of finish and performance is maintained over time. The sprung lever is adjustable to fit a wide range of locks. This is especially useful in doors with smaller door frames where the cylinder is further back. A shorter lever can be used on doors with latches that can be activated with the thumb located on the inside.
Lever Pad
The lever pad upvc handle is different from the lever handles that are commonly found on doors. These handle types can either use a single spindle (inline) or independently from each side by using two offset spindles or inline (pad). They are typically employed on UPVC double glazed doors and come in many variations & styles.
The handles have been tested to at least 200k cycles and are available in several finishes like White and Silver, as well as Chrome & Gold. The finish is compliant with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high level of durability and performance for the intended use.
All UPVC handle lever pads include a spindle and screws, and can be fitted on a uPVC door. The 211mm backplate fixation centres allow for a bigger handle, which is typically an advantage when replacing an old or faulty multi-point door lock mechanism. These handle levers are also spring-loaded, thereby solving the issue of handles hanging out of the horizontal position when they are not in use.
When selecting the replacement UPVC handle and spindle, it is essential to match the PZ dimensions of the multipoint lock as well as the uPVC door. This measurement is also referred to as the "handle centre" or "cylinder centres' and is a critical aspect to match the right handles.
After you have identified the correct size of PZ and the correct PZ size, you must make sure that the push and lever pads are shaped to fit the American with Disabilities Act compliant handles you require for your door. door handle repairs are usually a square or round shape with an internal lever and an external push pad.
The majority of UPVC lever pads that we sell are sprung, meaning that they will return to their horizontal position after not in use, rather than hanging out and possibly sticking in the frame. This prevents drafts and cold air from getting into a house. Also, the majority of the UPVC lever pad handles are handed which allows you to place them on either side of the door.
Euro Cylinder
Cylinder locks are commonly found on uPVC doors, but they can also be found on other types of door. They work by using a key to unlock a cylinder that then reveals pins which can be aligned to those inside the lock body, permitting them to turn the cam, thereby opening the door. Euro cylinders can be fitted with up to six pins with both internal and external doors typically needing different levels of security.
The choice of cylinder you choose is essential. It is based on the use that your doors and handles receive. External doors, for instance are required to be fitted with cylinders that are more secure and doors inside can be secured using the standard cylinder. Certain cylinders come with extra features that can improve security, such as anti-drill or anti-bump properties.
To ensure that the euro cylinder is of the right size for your door, it should be measured correctly. The cylinder should be measured from the hole for fixing screws in the middle to the end of the cylinder including the thumb turn if you have one. It is recommended to do this with the lock in place, but when this isn't possible, you may remove it to take measurements. A cylinder that is protruding beyond the handle and escutcheon might be vulnerable to attacks such as snapping locks, so it is crucial that it is not too long.
The design of most newer cylinders comes with anti-drilling as well as bump resistance features. These are designed to reduce the chance of a attack by forcing the cylinder to rotate in an opposite direction. This will help to deflect an attack and protect your door.
There are cylinders constructed to resist snapping. This is a typical attack on cylinders. A specially designed tool is used to break the lock's break line and the front of the cylinder is snapped off. This is a lot faster and more straightforward than gaining access through multipoint locks. It also leaves little evidence of a break-in, which can impede the insurance claim.
Spring Cassette
The spring cassette is situated in the base plate of your door handle. It is a spring-loaded solution to return your multipoint lock handles back to their normal position after use. The handles had no spring, and would slide when the locking mechanism was disengaged. This simple part is the best way to address this issue. It also prevents your door from getting stuck in either the closed or open position since they are difficult to close manually.
These spring cassettes are specifically made for use with multipoint locks that are sprung but they won't work with unsprung multipoint handles and you will need to have a bespoke hole cut into the backplate to allow them to fit (please check the image for a technical diagram). These cassettes are a solution for damaged or missing cassettes in the backplate of uPVC door handles. They are supplied in one unit. They come with a square cut out that can accommodate an 8mm shaft.
These spring cassettes are a great value solution to the issue of door handles that are sagging. They are simple to install and will extend the life of your uPVC door. Please contact our team for more information about our selection of uPVC accessories and spares. We are always ready to offer professional advice and assistance you.